|
|Settings|Save Settings: (the ".ini" file)
- All current
settings in the Editor environment EXCEPT those saved for
Arrangement, Mixer and AVI Offset as outlined below. - all main window sizes & locations, all PC filepaths, all passwords, record bitrate,
etc..
- Settings are
saved in the current .ini file on the PC. i.e. the .ini file that was
invoked at start-up of current SSEditor
instance, generally found in folder C:\Soundscape\.
- Editor will
use these settings when next opened with a shortcut invoking above .ini file.
Notes:
- To retain your
current environment settings you must use |Settings|Save
Settings before exiting Editor. There is no prompt to "
Save changes?" when exiting Editor after changes are made to
environment settings, except Passwords & perhaps Custom Toolbars -
see below.
- Changed/New
Passwords are saved automatically to above .ini
file at the time you OK this option anyway.
- In the |Settings|Customize Tool Page: you are given a choice
to save edited toolpage (saves to above .ini) - otherwise all current toolpage
preferences are saved anyway when |Settings|Save
Settings is used.
- Current Mixer Window
Position & Size are saved as defaults for next New Mix...
- By manipulation of
Shortcuts and .ini filenames, individual
user/project Editor instances can be
customized.
|
|
|File|Save Mixer
- All Channel Builds , configurations, I/O Routing, Element Info, Plugin Settings (*see note
4) & current fader/knob/switch positions.
- Track Arming
status.
- Mixer Window
Position & Size, Plugin window positions,
current channels visible and View Size (Q or X).
- Automation
Enabled/Disabled.
- Automatic
Delay Compensation Enabled/Disabled. (Red/SS32 only)
Notes:
- All the above will save when using '|File|Mix Save' or '|File|Mix
Save As', and keyboard shortcuts Ctrl+Alt+Q / Ctrl+Q, however note that '|File|Mix
Save' & keyboard shortcuts Ctrl+Alt+Q or Ctrl+Q do not become active unless
changes have been made to Mixer Build, Routing (ie
resulting from using Edit) or toggling of Automation/ADC
Enabled/Disabled. For Ctrl+Alt+Q to work, the
current MIX must have opened from the SDisk;
for Ctrl+Q to work, the current MIX must have
opened from the PC. NOTE:
from EditorV4.2 (REd/SS32) onwards, changes to any mixer settings/knobs
will activate '|File|Mix Save' & keyboard shortcuts Ctrl+Alt+Q or Ctrl+Q.
- ONLY Changes to
Mixer Build, Routing (ie resulting from using
Edit) and toggle of Automation Enabled/Disabled will result in a message
" Save Mix changes to SFile or PCFile?" when attempting to Open another mixer,
or to Exit Editor, without having saved recently. ALL other changes must
be saved Manually, or be handled by the Arr Automation. NOTE: from EditorV4.2 (REd/SS32) onwards, changes
to any mixer settings/knobs will activate message " Save Mix changes
to SFile or PCFile?"
when attempting to Open another mixer, or to Exit Editor.
- HDR1 Only:
Input (1/2) - Dig/Analog selection choice is saved with |Settings|Save Settings; this determines which signal
appears at the Mix Channel In1-2.
- * Users of SpinAudio SpinDelay
Plugin - SpinDelay
parameters in any mixer are dependant on EXTERNALLY set Configuration
Manager ( "C:\Program Files\Spin Audio\SpinDelay for Soundscape\dspcfg.exe" before
starting Editor) as, it appears, percentages of the maximum delays for
each type in the prevailing Configuration parameters, not actual values. This means if you set up SpinDelay
in a mixer to have correct delays, save the mix, re-configure SpinDelay, and then later re-open the same
mix, the wrong delays appear. So you must also save the spindelay
.cfg file ( C:\Program Files\Spin
Audio\SpinDelay for Soundscape\xxxxxxx.cfg ) with your backup of project, and use
this when restoring, or you will not get the same delay settings.
|