-
Operating
Voltage: 10 - 30V D.C., 25mA maximum current.
-
P.C.B.
Dimensions: 100x160mm, ~35mm maximum height.
-
Inputs:
8 without expansion boards.
-
Outputs:
1 aux output 100mA max, 1 SPDT 1A relay (may be
omitted from board).
-
All
screw terminals are of the pluggable type.
-
1
Asynchronous input/output port factory programmable
from 300 to 9600 Baud. A bus interface board is
required to connect to various peripherals (RS485
driver built in if required).
-
1
Synchronous input/output port factory programmable
up to 1Mbit transfer rate. A bus interface board
is required to connect to various peripherals.
-
1
Synchronous SPI expansion port factory programmable
up to 1Mbit transfer rate.
-
1x16
way ribbon cable header carrying 1x8 bits output
port and 1x8bits I/O port. (Normally used to connect
the inputs and outputs expansion board(s)).
-
1xLCD
and keypad interface 14 way ribbon cable header.
-
1x4
ways DIP switch.
-
1x16
way ribbon cable header carrying various interrupts
and I/O bits.
-
1x
Serial EEPROM with write protect link.
